Value Case Roundup: A Look at the Affordable
by Purav Sanghani on February 1, 2005 12:35 AM EST- Posted in
- Cases/Cooling/PSUs
Linkworld 3210
We threw in another case from Linkworld, the heavily modified 3210 to show the amount of modifications we can get for such a price.
External Design
The front bezel is really something to look at. It has lots of curves and a paint job we can only expect from higher end cases which cost 2-3 times more. There are a total of four 5-1/4" drive bays which are all occupied by optical drive bezels. When we do use these drive bays, it is usually for optical drives anyway so the manufacturer decided to include four optical drive bezels instead of just one. Under those bays we see two 3-1/2" drive bays with the bottom bay occupied by a floppy drive bezel to match.
Beneath the drive bays we see two chromed buttons side by side which are the reset and power buttons, in that order. We are concerned that we may accidentally press the reset button instead of the power button, or vice versa. Separating them by as little as half an inch could make a world of difference.
At the bottom of the case we see a small chromed grill and what looks like two headlights on either side. Now, most of us believe that extra lights on the bezel become an annoyance after a while, but the look of this case makes us believe were running a Benz under our desks!
We see at the top there is a handle which is very strong and can withstand the weight of a filled case. This case is definitely aimed at gamers with its mobility.
The right side of the case features a simple panel but also a door which hides the auxiliary ports. These ports include audio in/out and two USB ports.
The left side panel features a large window with an 80mm LED fan mounted on a diagonal over the CPU area. It looks to be an intake which will provide the CPU's heat sink fan with "fresh" external air. To remove this panel we remove two screws at the back of the case and slide the panel pack.
Internal Design
Looking inside the 3210 we notice a similarity between it and the 8654BL. First off, it has seven total 3-1/2" drive bays, two being exposed which provides us a lot of room for expansion. The drive bays are design differently but the basic layout is the same.
The motherboard tray is also very similar and features raised stand-offs like the 8654BL as well as the 3131G. Linkworld also includes plastic stand-offs for greater flexibility and plastic insulators for those raised stand-offs that won't be put to use to avoid shorting a motherboard circuit.
The expansion slots are also similar to those on the 8654BL with their external mounted design. There is a cover on the back which hides the point of contact of the expansion slots and the add-in card.
Facebook
Twitter
RSS
58 Comments
View All Comments
KristopherKubicki - Tuesday, February 1, 2005 - link
sdfg: I think you mean the Antec Lanboy looks like the Chenming cases...Kristopher
aeternitas - Tuesday, February 1, 2005 - link
Yes #24, we are all spoiled. Spoiled with _quality_. Some of us like to have nice things. I for one dont want to see cheap plastic houseing my loveingly put together equiptment. This is a hobby for most, and with a hobby means quality is the standard.If you are just building PCs for people that dont care, then by all means, but this isnt really a site for people that dont care.
sprockkets - Tuesday, February 1, 2005 - link
Err, no In-Win cases?miketheidiot - Tuesday, February 1, 2005 - link
these cases are all trash. Drop the extra $20 and get a decent antec PSU/case combo.And why wasn't the Sonata or something lke that included?
Cygni - Tuesday, February 1, 2005 - link
God you guys are ridiculous! I personally use Antec cases for my own personal builds, but when building for my business, i use the cheapest non-ugly case I can find. Of course, PSU is a concern, but im not slapping FX's in with a 250wt. PSU does change reliability, this is fact, but it is FAR overhyped. Bad RAM can make 10 times the impact.Honestly, who gives a crap if the case isnt amazing? Its a CASE! As long as its not ugly, and as long as its fairly well put together (almost all of them are these days), who cares? 99% of the people i build computers for never open the case, so who cares if it has sharp edges? I dont know. You guys all sound really really spoiled, haha. I personally thought alot of the cases reviewed are FAR less ugly then so called "Gamer cases" that are out there with friggen dragons with LED eyes that readout useless voltage information...
MarkM - Tuesday, February 1, 2005 - link
I'm with #4 too -- a the point you are getting this level case, you are probably looking at a no-frills basic PC with cheaper components, at which point it doesn't make much sense for you to be building anyway, you should just get a Dell & get that conveniecne/security of waranty.Not to mention if you are building so basic a PC, you probably are not reading anandtech :)
Anywya, I'm not sure I see great value. I got my Sonata with the 350w quiet PSU for $70 total AR, some of these cases would cost about as much with even an inferior PSU. So why bother at all?
digit - Tuesday, February 1, 2005 - link
ive got that raidmax (windowless version) and i really like it. it came with the 4 fans already installed in front and its definitely the coolest running case ive ever had. recently ive started having problems with power stability from the psu, but it worked just fine for over a year.fatdog6 - Tuesday, February 1, 2005 - link
Im pretty dissapointed with this review,first off of the 150 or so systems that i have built my first consideration is reliablity/stability expecially in a budget build. I I can i imagine getting a call and then seeing the power supply fell down knocked the cpu off into the gpu trashing the memory on the way.!!
As stated by Spacecomber #15
"So far, I haven't found a case and power supply (bought seperately or together) that is as good as and less expensive than the Antec 1650, which is my choice for entry level and basic systems. $55 for a case that includes 120mm fan, Antec SL-350 power supply, and side CPU air guide."
As stated by Lonewolf #13
"The power supplies of these review units are horrible, and do not in any way represent good additional value"
DaveA - Tuesday, February 1, 2005 - link
http://images.anandtech.com/reviews/cases/roundups...yeah whats up with that?
Desslok - Tuesday, February 1, 2005 - link
In the review for the Codegen 6209 is the motherboard tilted in the install pic??