Price-Point Comparing Three-Way Case Shootout
by Joshua Buss on January 13, 2006 12:05 AM EST- Posted in
- Cases/Cooling/PSUs
Dynapower E68 (cont’d)
The bezel doesn't just have the ability to slide at the bottom either; in addition to hinging to reveal the drive bays, the main portion (the top door) also slides along a couple of slits so that after opening, it can be further moved out of the way. While some people might consider such a dynamic front gaudy, it's still undeniable that it's a very nice front panel, especially given this unit's cost.
With all the attention that the front of this case has received, it's a good thing that the rest of the case is almost entirely devoid of anything that needs a lengthy explanation! This last picture of purely the exterior of the chassis really doesn't differ much from the other two cases that we've looked at all. Again, the side-mounted 120mm fan shows up, but besides that, there are no other elements of cooling to investigate here.
With that investigation over, let's dive into this value-oriented case. First off, as is probably to be expected, there are no tool-less elements in the E68. Also, we should mention that we actually routed the cables from the front through a different opening to help our cable management.
Even so, the actual expandability of the Dynapower case is just as good as the other two cases. Four hard drives, one external 3½“, and four external 5¼” drives can all be accommodated in the E68.
Support for different motherboard types is even more limited in this case, but again, the standard ATX types shouldn't be much of a problem, if at all.
Standard knock-out expansion card covers are the name of the game here, but unlike other incarnations, these won't sever an appendage when attempting to remove them. And considering the lack of tool-less options here, it's tough to beat the tried-and-true method of using a single screw to hold each add-in card in place.
Really, that's about all there is to the inside of the E68. With a steel construction, the case feels just as sturdy as the X1, and if one wants, they can add another 120mm fan in the back and 80mm in the front. Installing our test bed was entirely void of surprises. The side-mounted IDE cable was neither easier nor harder than in the previous mid-towers.
The bezel doesn't just have the ability to slide at the bottom either; in addition to hinging to reveal the drive bays, the main portion (the top door) also slides along a couple of slits so that after opening, it can be further moved out of the way. While some people might consider such a dynamic front gaudy, it's still undeniable that it's a very nice front panel, especially given this unit's cost.
With all the attention that the front of this case has received, it's a good thing that the rest of the case is almost entirely devoid of anything that needs a lengthy explanation! This last picture of purely the exterior of the chassis really doesn't differ much from the other two cases that we've looked at all. Again, the side-mounted 120mm fan shows up, but besides that, there are no other elements of cooling to investigate here.
With that investigation over, let's dive into this value-oriented case. First off, as is probably to be expected, there are no tool-less elements in the E68. Also, we should mention that we actually routed the cables from the front through a different opening to help our cable management.
Even so, the actual expandability of the Dynapower case is just as good as the other two cases. Four hard drives, one external 3½“, and four external 5¼” drives can all be accommodated in the E68.
Support for different motherboard types is even more limited in this case, but again, the standard ATX types shouldn't be much of a problem, if at all.
Standard knock-out expansion card covers are the name of the game here, but unlike other incarnations, these won't sever an appendage when attempting to remove them. And considering the lack of tool-less options here, it's tough to beat the tried-and-true method of using a single screw to hold each add-in card in place.
Really, that's about all there is to the inside of the E68. With a steel construction, the case feels just as sturdy as the X1, and if one wants, they can add another 120mm fan in the back and 80mm in the front. Installing our test bed was entirely void of surprises. The side-mounted IDE cable was neither easier nor harder than in the previous mid-towers.
69 Comments
View All Comments
yacoub - Friday, January 13, 2006 - link
You also complain about "extra effort" when people looking at cases in the first place are DoItYourself-ers/BuiltMyOwn-ers. I hardly think unscrewing a fan to put some soft grommets b/w it and the case frame is so much effort that it negates the benefit. Considering this case already does the vast amount of what-was-formerly 'hard work' in making a case quiet, this case is truly exceptional. It even offers drive suspension standard (or grommetted drive sleds), a quiet fan w/ 3-speed adjustment, excellent airflow arrangement, silencing panels on the sides and top of the case, everything locks down so nothing rattles, and a quiet PSU. Seriously you can't ask for much more than that when it comes to quieting a system and this case offers all that stock without having to mod anything). That's hardly "extra effort" especially for someone who's already going through the effort of building their own system.Tamale - Friday, January 13, 2006 - link
I must ask you then, why with all of these advanced quieting components did it still make just as much noise as the X1? Personally I blame the tri-speed fan, as even set to the low speed setting it moved enough air to make a noticeable "whooshing" sound... compared to the absolutely silent power supply included with the P150 I found this rather strange. It was the exact same reason the P180 wasn't as quiet as I was expecting it to be.. I wouldn't be surprised to see antec tune their 120mm fans a tad so that the low speed setting is really as quiet as it could be.yacoub - Friday, January 13, 2006 - link
Also it's a joke for any Anandtech writer to complain about the price of the case when you guys do all your tests using FX-55/7800GTX/RAID Raptor God boxes (slight exaggeration to make a point). Anyone buying any of those over-priced aspects of a system can certainly afford to spend the money on a good case. I built a budget gaming system and I bought a P150 because for me it is very important to have a silent, stylish (not gaudy/kiddy), cool-running rig. That's more than worth the extra $$, imo.Tamale - Friday, January 13, 2006 - link
It's not a joke to talk about price at all.. AT has always been a site about getting the best components for a particular user's needs, and unless your needs require you to have a more subtly styled case it's hard to recommend the P150 over the X1 based on factors such as noise, usability, and cooling performance. Just think back to our price guides or recommended gift items.. value-oriented products such as the 6800GS have historically gotten the highest recommendations - not the latest and greatest high-end uber-expensive stuff.Also, whether the people who are truly on the bleeding edge of style such as you and me choose to believe it or not, the cases that are a little more 'gimmicky' are still growing in popularity, not shrinking. Most people still haven't even heard of putting windows in computers, and think that kinda thing is "cool". It's no surprise at all that the elitist enthusiasts (including myself) who had a windowed case back in 2001 are going to look at those kinds of cases now and scoff at them, boasting "they're already out of style".. but a truly good reviewer has to take into account all these factors and write for the majority of all readers and even potential readers - not the majority of readers who are going to be vocal, or are forum regulars, and especially not for the majority of readers who have tons of money, time, and experience with working with cases... and I don't care how you try to slice it, the P150 does not fit in the category of "budget" when one could get a case like the E68 for $30... People seem to think that I don't even like the P150.. this is far from the truth.. I just feel that for that kind of a price premium it better offer the absolute best performance out-of-the-box, and this article is simply designed to open people's eyes a bit and be more careful with their money before automatically assuming that the more expensive a case is, the better it must be.
I was a little put-off by the manner in which the link to silentpcreview was posted because it immediately followed a comment implying that I didn't know what the P150 was designed for... if it wasn't meant as a passive attack on me then I apologize for my comment, but I have a hard time believing no one else read it that way.
Also, an excellent point was made about the X1's choice to put the USB ports behind the door and the implications of having a door covering the optical drives at all.. truly there are only certain users who will prefer to have a door, but for the ones who do the X1 is really a fine choice.
Lastly, the front fan mounting option in the X1 wasn't discussed at great length because the case performed quite well without it, but of course if one had more hard drives or hard drive temperatures were of utmost importance the option is there.
I hope I've cleared up some misconceptions, and helped at least a couple of you better understand where I'm coming from.
yacoub - Friday, January 13, 2006 - link
The P150 is much quieter than either of the other two cases when properly configured. The operative words in that sentence are the closing phrase "when properly configured". A site like SilentPCReview is an excellent place to get more info about how to build and configure a truly silent system. It is not an advertisement, it is additional reading reference support for helping those interested in learning why it's the best of these three cases and how to use it to its full potential.photoguy99 - Friday, January 13, 2006 - link
Tamale you have made a bad point.The link posted was not any sort of advertisement or exploitation.
It was simply relevant to the discussion and I believe actually adds value to AnandTech because the discussion becomes richer and more complete.
Please "show a little common courtesy" and not feel threatened by something that only enriches the forums more.
Thank you.
noxipoo - Friday, January 13, 2006 - link
most users here at anandtech have been around for years, and we have always talked about other sites besides anandtech. I don't see a problem linking to another review on the site. In fact Brandon used to do it on the news part on the homepage. It is not advertising in anyway for another review link. As for getting the p150 quieter, I'd rather do that than have the Raidmax because of the looks.gplracer - Friday, January 13, 2006 - link
I like the P-150 but where can you get white drives to match it? I would not want to put beige drives in it.yacoub - Friday, January 13, 2006 - link
The covers over the bays actually rotate down out of the way when the drive opens. You never see your actual drives when they are closed. Hard to explain.ceefka - Saturday, January 14, 2006 - link
I put in a silver DVD burner and a silver 3,5" internal card reader. That doesn't look too bad either IMHO.