Features: nForce 600i Platform

While our testing will concentrate on the EVGA 680i motherboard designed by NVIDIA, it is important to point out that 680i is a member of a whole new family of NVIDIA chipsets for the Intel Socket 775 platform.

NVIDIA Intel Chipsets
Market Segment Chipset Price
Hard-Core Enthusiast nForce 680i SLI $249-$299
Performance Gamers nForce 650i SLI $149-$199
Mainstream Gamers nForce 650i Ultra $99-$149

Across the line NVIDIA emphasizes that buyers can expect spectacular overclocking with their new 600i Series motherboards. Other features are basically a refinement of the feature set introduced with the NVIDIA 550/570/590 series this past summer. These include DualNet, Massive RAID 5, FirstPacket, and MediaShield which will be discussed in more detail in the features section. The 600i family also fully supports Intel Core 2 Extreme (dual & quad), Core 2 Quad, and Core 2 Duo processors.

NVIDIA nForce 600i Family Specifications


Index nForce 680i Platform
Comments Locked

60 Comments

View All Comments

  • Wesley Fink - Thursday, November 9, 2006 - link

    The other time you might need a fan on the northbrdige is when using water cooling or phase-change cooling. There is no air-flow spillover from water-cooling the CPU like there is with the usual fan heatsink on the CPU, so the auxillary fan might be needed in that situation.
  • Wesley Fink - Thursday, November 9, 2006 - link

    The 680i Does NOT require active notrthbridge cooling and is shipped as a passive heatpipe design. At 80nm it is much cooler than the 130nm nVdia chipsets. The fan you see in the pictures is an included accessory for massive overclocking, much like Asus includes auxillary fans in their top boards.

    In our testing we really did not find the stock fanless board much of a limitation in overclocking as the northbridge did not get particularly hot at any time. We installed the fan when we were trying to set the OC record and left it on for our 3 days at 2100 FSB. Since it is a clip and 3 screws to install we left it on.
  • IntelUser2000 - Monday, November 13, 2006 - link

    quote:

    The 680i Does NOT require active notrthbridge cooling and is shipped as a passive heatpipe design. At 80nm it is much cooler than the 130nm nVdia chipsets. The fan you see in the pictures is an included accessory for massive overclocking, much like Asus includes auxillary fans in their top boards.

    In our testing we really did not find the stock fanless board much of a limitation in overclocking as the northbridge did not get particularly hot at any time. We installed the fan when we were trying to set the OC record and left it on for our 3 days at 2100 FSB. Since it is a clip and 3 screws to install we left it on.


    That's funny. A cooler running one consuming more power. Must be the die size is much larger :D.
  • yacoub - Thursday, November 9, 2006 - link

    ah okay thanks for that clarification! =)
  • yacoub - Thursday, November 9, 2006 - link

    NTune would be a lot more interesting if it wasn't so slow to respond to page changes, cumbersome, and a gigantic UI realestate hog.

    The same functionality in a slimmer, more configurable, and efficient UI design would be highly desireable.
  • yacoub - Thursday, November 9, 2006 - link

    and actually, that goes for the entire NVidia display/GPU settings configuration panel.
  • Khato - Wednesday, November 8, 2006 - link

    Each CPU is going to have a max FSB clock that it'll run stably at for the same reason that it has a max core logic frequency. The main difference here is that you have two possible barriers: signal degredation due to the analog buffers not being designed for such high speed and then whatever buffer logic there is in the CPU to clock cross from FSB to core not liking the higher frequency. I'm kinda leaning towards the buffer logic being the limiting factor, since I'd expect the manufacturing variance in the analog buffers to be minimal. That and the described 75MHz variance in top FSB frequency between various processors sounds reasonable for non-optimized logic.
  • Staples - Wednesday, November 8, 2006 - link

    I have no need for SLI. Makes the board more expensive and an SLI setup is just not worth it to me. I was about to buy a P965 chipset but now I am interested in a the 650i Ultra. Will we see a review of this chipset in the future? Most of it seems to be exactly the same as the 680i however it does lack some features and I am afraid that those missing features may affect performance. As it stands now, do you expect the performance of the 650i Ultra to perform identical to the 680i SLI?
  • Gary Key - Wednesday, November 8, 2006 - link

    quote:

    As it stands now, do you expect the performance of the 650i Ultra to perform identical to the 680i SLI?


    We do not, we do expect the 650i SLI to perform closely to it. We will have 650i boards in early December for review. :)
  • Pirks - Wednesday, November 8, 2006 - link

    is this functionality where you can overclock your CPU and FSB and memory on the fly without rebooting Windows available only on nForce mobos? I'm a stability freak and I want to be able to raise and lower my clocks and voltage on the fly, similar to the way Macs do this - they spin their fans under load and become totally quiet when idle - I wanna do the same so that my rig is dead quiet when idle/doing word/inet/email/etc and becomes noisy and fast OCed beast when firing up Crysis or something. and I want this Mac-style WITHOUT rebooting Windows

    so do I have to buy nVidia mobo for that?

    600i series only or earlier nForce 4 or 5 series will do as well?

    I still can't dig what's up with these "dynamic BIOS updates that _require_ reboot to work" - so can you OC without rebooting or not? if yes - what are these BIOS options that nTune changes that DOES require reboot?

    could you happy nTune owners enlighten me on that stuff? thanks ;)

Log in

Don't have an account? Sign up now