Intel's Core 2 Extreme QX9770 Preview - Updated
by Anand Lal Shimpi on November 19, 2007 12:02 AM EST- Posted in
- CPUs
Is 3.2GHz Faster than 3.0GHz?
As you've undoubtedly seen by now, Intel still remains unchallenged in the high end processor market, especially when it comes to quad-core CPUs. AMD's Phenom will only ship at a maximum of 2.3GHz this year, and 3.0GHz won't happen until after the QX9770 launches next year in all likelihood.
With no real competition from AMD, the biggest challenge the QX9770 faces comes from Intel. The graph below should give you a quick idea of how obsolete the QX9770 will make the QX9650 (we used the same test configuration from our Phenom article for these numbers):
The performance gains are impressive, given that we're only looking at a 6.6% increase in clock speed. The 1600MHz FSB does seem to do a bit, giving us 7 - 8% performance boosts in a couple of instances.
Without knowing the price of the QX9770 it's tough to say whether or not you're getting what you pay for. Generally these Extreme parts aren't worth their asking prices, but if you're wondering where peak performance will be early next year, the QX9770 should give you a good indication.
Facebook
Twitter
RSS
27 Comments
View All Comments
supremelaw - Monday, November 19, 2007 - link
http://www.anandtech.com/cpuchipsets/intel/showdoc...">http://www.anandtech.com/cpuchipsets/intel/showdoc...
"... switching to a newer Intel retail heatsink/fan
fixed my issues well enough for me to run through all the tests."
Yep! Same 4 defective fasteners:
http://www.anandtech.com/cpuchipsets/intel/showdoc...">http://www.anandtech.com/cpuchipsets/intel/showdoc...
Sincerely yours,
/s/ Paul Andrew Mitchell
Webmaster, Supreme Law Library
http://www.supremelaw.org/">http://www.supremelaw.org/
sprockkets - Tuesday, November 20, 2007 - link
It does not explain, however, the increased power usage. In any case, the HSF mounting mechanisms on Intel's chips since the P4 have been subpar at best. First, they post warnings about how they can bend but not damage motherboards, then they switch to the current scheme. AMD's system since the K8 is simple: provide proper bracing on and under the mb and you are set.jones377 - Monday, November 19, 2007 - link
?acx - Monday, November 19, 2007 - link
Chips can have varying levels of leakage current from batch to batch or even within the same batch. The difference between the lowest leakage chip vs. highest leakage chip can be quite large. Chips with high leakage are usually faster than chips with lower leakage. The power draw is probably due to high leakage because of the large increase in idle power usage of QX9770 vs QX9650 (58W). Subtracting 58W from QX9770's full load power consumption yields 209W. This is 9% more than QX9650's power consumption under full load. This is a more reasonable difference in power consumption given the increase in clock speed and FSB. Leakage also increases at higher temperatures. A very fast part on the borderline of acceptable leakage may fail at lower temps than a slow chip with more leakage margin.MrKaz - Monday, November 19, 2007 - link
Could you do some double check the CPU voltage?How the power consuming grow up so much for just 200Mhz increase?
(It’s 4 x 200Mhz) but even so.
Is Intel getting the same P3 1.133MHZ bug? Where the Pentium 3 couldn’t be clock more than 1.000MHZ? But this time hit at 3.2GHZ.
Or is this CPU manufactured in some other less "qualified" Intel factory?
Could you under clock it to make sure?
swaaye - Tuesday, November 20, 2007 - link
The voltage is definitely hig. Default should be around 1.25v, and that's for the 65nm Q6600. I see 1.336v being reported. That's where the power consumption is coming from.xsilver - Monday, November 19, 2007 - link
Could somebody explain why after only 2 years after the death of netburst and its super high power envelope, we are stuck in the same situation again?Also is there anything being done for future processors to rectify this problem? (besides die shrink that is)
retrospooty - Monday, November 19, 2007 - link
I think there was some other issue going on here that should have been looked into before posting the article. Most reviews of the 3ghz/1333fsb model are clocking up to 4ghz on air - now we are saying the 3.2 has issues with heat? come on, get real.mindless1 - Monday, November 19, 2007 - link
Obviously it's true, since they did measure a significant increase in power consumption which has to end up as heat. Granted some comes from the higher FSB, a very small amount only!I will speculate that one of two things is true:
1) This sample needed higher voltage to remain stable than what they eventually plan on selling through channels. They'll release their spec sheet and then we'll see, but really the numbers don't look too outlandish given the clock speed and quad cores, if the vcore is raised a bit.
2) The motherboard VRM subcircuit isn't able to handle this current level so well and excessive ripple causes higher consumption.
What would be interesting is to use the better heatsink and lower the vcore a notch to see if that regains a bit of stability, or of course to try it on more motherboards.
murphyslabrat - Wednesday, November 21, 2007 - link
OMG, can we only hope?!?If Intel responded this quickly, with a shoddy product to boot, could this mean that they are afraid of Barcelona/Agena?